background image

47

System Settings

Use 

UTILITY mode

 to make various SYSTEM settings for the A-500S.

fig.util*

1.

Simultaneously hold the 

[MIDI CH]

 button and 

[PGM CHANGE]

 button 

down.

The display will indicate “UTL,” and the A-500S enters UTILITY mode.

fig.sy0

2.

Press the 

[SYSTEM]

 key.

The display will indicate “SY0” and blink.

fig.enter

3.

Use the 

VALUE knob

 or the 

[0]

[9]

 keys to specify the System setting that you want to 

set, and then press the 

[ENTER]

 button.

* The setting will be cancelled if you press another button instead of the 

[ENTER]

 button.

Confirm what’s indicated and use the appropriate method to make the setting.

Set the system settings

Display

Mode

Key

board

Content of the setting

Default

Setting 

method

F8 CLOCK 
ON/OFF

0

Specify whether F8 Clock is to be transmitted.

OFF

p. 48

F8 CLOCK 
DEFAULT 
TEMPO

1

If “F8 CLOCK ON/OFF” is ON, specify the default 
value of the F8 Clock. After the power is turned on, 
this tempo will continue to be output until you 
move a controller to which TEMPO is assigned.

120

p. 48

VELOCITY 
CURVE

2

When you play the keyboard of the A-500S, note 
messages will be transmitted with a velocity value 
that corresponds to your playing strength. 

 

By setting the VELOCITY CURVE, you can modify 
the keyboard’s sensitivity and the curve that is 
followed when the velocity value changes.

1-MEDIUM

p. 49

KEY 

 

VELOCITY

3

Specify whether the transmitted velocity value will 
vary according to the keyboard sensitivity and 
curve you selected in “VELOCITY CURVE”, or will 
always be transmitted at a fixed value.

TOUCH

p. 50

MIDI I/F 
MODE

4

Specify whether the A-500S will function as a MIDI 
interface using its MIDI connectors.

ON

p. 50

VALUE 
KNOB

5

Select the parameter that is transmitted by the 
VALUE knob.

VOLUME

p. 51

FACTORY 
RESET

6

Restore all settings of the A-500S to their factory-
set condition.

-

p. 53

A-500S_e.book  47 ページ  2010年2月19日 金曜日 午後8時3分

Summary of Contents for Cakewalk A-500S

















































































Reviews: