Roland Cakewalk A-500S Owner'S Manual Download

Page: 20 / 80

Driver Installation and Settings

Steps to be performed on the A-500S itself are marked by a

symbol.

Do not connect the A-500S to your computer until you are directed to do so.

* If the

Authenticate

dialog box or the dialog that indicates

“Installer requires that you type your password”

appears

during the installation, enter your password and click

[OK]

* What you actually see on the screen may differ depending on your system.

Start up your computer with the A-500S disconnected.

* Disconnect all USB cables other than those for a USB keyboard and/or USB mouse (if used).

Close all currently running software.

Insert the included

A-500S CD-ROM

into your CD-ROM drive.

Double-click one of the following icons on the

CD-ROM

to start up the installer.

A message concerned with checking whether installation is possible may appear. If so, click

[Continue]

If a message indicating that installation is not possible appears, check the operating system you’re using, and
perform step 4.

The screen will indicate

“Welcome to the A-500S Driver Installer.”

Click

[Continue]

If the display indicates

“Select a Destination,”

click your start-up disk to select it, and then click

[Continue]

The screen will indicate

“Easy Install”

“Standard Install.”

Click

[Install]

[Upgrade]

The screen will indicate

“Installing this software requires you to restart your computer when the

installation is done.”

Click

[Continue Installation]

Macintosh users

Installing the driver

Installer

Mac OS X 10.6 or later

[A500S_USBDriver.pkg] (/Driver/10.6)

Mac OS X 10.5 or earlier

[A500SUSBDriver.pkg] (/Driver/10.4_10.5)

Operation of the A-500S

A-500S_e.book 20 ページ２０１０年２月１９日　金曜日　午後８時３分

Summary of Contents for Cakewalk A-500S

















































































Search results

Summary of Contents for Cakewalk A-500S

Reviews:

Related manuals for Cakewalk A-500S

Brands by name

Popular brands

Roland Cakewalk A-500S, Owner'S Manual

Search results

Summary of Contents for Cakewalk A-500S

Reviews:

Related manuals for Cakewalk A-500S

Brands by name

Popular brands