Roland 417741A, Owner'S Manual

Page: 8 / 130

8
Getting Ready
1. Turning the Power On/Off
Types of batteries that can be used
• Alkaline battery (AA, LR6)
• Rechargeable Ni-MH battery (AA, HR6)
NOTE
The R-07 cannot rechargeable Ni-MH batteries. You’ll need
to use a battery charger designed for rechargeable Ni-MH
batteries.
1. Make sure that the power is off.
If the power is on, turn it off. Slide the R-07’s [POWER] switch toward
POWER to turn the power on/off.
2. Open the cover of the battery compartment located on
the bottom of the unit.
Turn the R-07 over, then slide the cover downward while pressing
the area circled in the illustration.
* When turning the unit over, be careful so as to protect the buttons
and knobs from damage. Also, handle the unit carefully; do not
drop it.
3. Install the batteries.
Install two AA batteries in the compartment, making sure that the
polarity (+/– orientation) is correct.
+
+
-
-
4. Close the cover of the battery compartment.
5. Slide the [POWER] switch toward POWER for several
seconds; the power will turn on.
When the power turns on, a screen like the following will appear in
the display. We’ll call this the “main screen.”
6. To turn the power off, slide the [POWER] switch once
again toward POWER for several seconds.