Roland 417741A, Owner'S Manual

Page: 4 / 130

Panel Descriptions
4
[ ] button
Press this button to move to the beginning
of the file, or to select the previous file. For
a WAV file that contains marks, this button
returns to the previous mark. By holding
down this button, you can rewind through
the file.
You can do this during playback or while
stopped.
This button also moves the cursor to the
left in the screen, or changes the value of
the selected item.
INPUT [+] [–] buttons
These buttons adjust the level of the audio
that’s being input via the built-in mics, the
MIC/AUX IN jack.
Pressing [+] will increase the input level.
Pressing [–] will decrease the input level.
[ ] button
This button stops playback or recording.
This button also moves the cursor
downward in the screen, or changes the
value of the selected item.
REC/PLAY indicator
Operation Status
Lit red Recording
Blinking red Record-stanby
Lit green Playing
Blinking green Play-stanby
[ ] button
Press this button to enter recording-
standby mode or to begin recording.
You’ll also use this button to confirm a
selection.
VOL [+] [–] buttons
These buttons adjust the volume that
is output from the built-in speaker, the
PHONES jack or the Bluetooth device.
[ ] button
Press this button to start playback, or to
pause playback or recording.
This button also moves the cursor upward
in the screen, or changes the value of the
selected item.
[ ] button
Press this button to select the next file. For
a WAV file that contains marks, this button
advances to the next mark. By holding
down this button, you can fast-forward
through the file.
You can do this during playback or while
stopped.
This button also moves the cursor to the
right in the screen, or changes the value of
the selected item.