INSTALLATION INSTRUCTIONS
PAGE 7
1.
Remove Rola RE cross Bars from the carton. Slide
out the outer under-cover strips.
Fig. A
2.
Open Fit Kit carton and use instructions to find the
X/Y set-up details and slide the positioning slider end
tabs (B) to the desired setting scales.
Fig. B
3.
Open the cam levers on all the DFE end supports as
shown in
Fig. C.
4.
X and Y measurement using
millimeters or inches.
Fig. D
X/Y Scale Numbers
Under-cover strips
End Tab (B)
Align tab with scale numbers
Slide
Cam
Lever
Fig. A
Fig. C
Fig. B
Scale
X & Y
mm & inch
dimensions
Fig. D
