Rokonet ORBiT-14, Installation Manual

Page: 39 / 60

Installation Manual
33
Comments on Dialler Control 1: (Location 052: 2
nd
Digit)
Redial Wait Answering Machine
Override Follow Me Enable
The number of seconds
between attempts at
redialling the same phone
number when it is busy or
unresponsive. Applies to
both the MS Retries and FM
Retries parameters.
Yes : The Answering Machine
Override is enabled, as
follows:
The Upload/Download
software at the alarm company
calls the account. The software
hangs up after one ring by the
U/D operator.
Within one minute, the
software calls again. The
ORBIT-14 is programmed to
pick up this second call on the
first ring, thus bypassing any
interaction with the answering
machine.
NOTE:
This feature is used to prevent
interference from an answering
machine with remote
Upload/Download operations.
No : The Answering Machine
Override is disabled, and
communication takes place in
the standard manner.
Yes : Enables Follow Me
communication.
In addition to reporting to the
Central Station, the ORBIT-14
has a Follow-Me feature, in
which a standard phone call is
made to a designated phone
number, reporting a system
event. The Follow Me can
convey a series of tones
representing an alarm; it can
send numeric or alphanumeric
data to a page to display a
specific event; or it can send
pre-recorded voice messages
using the voice module.
No : Disables Follow Me
communication.
NOTE:
If both MS phones and FM
phones are defined, the system
will first call the MS phones and
then the FM phones.
Location: 052 Dialler Controls 1: (1
st
Digit):
1
st
Digit Dialling Method Duty Cycle MS Retries
0 DTMF N/A 3
1 Pulse @ 20 pps 67/33 3
9 Pulse @ 20 pps 67/33 8
8 (Default) DTMF N/A 8
5 Pulse @ 20 pps 61/39 3
D Pulse @ 20 pps 61/39 8
3 Pulse @ 10 pps 67/33 3
B Pulse @ 10 pps 67/33 8
7 Pulse @ 10 pps 61/39 3
F Pulse @ 10 pps 61/39 8
Location: 052 Dialler Controls 1: (2
nd
Digit):
2
nd
Digit Redial Wait Answering Machine Follow Me Enable
0 Immediate No No
1 20 No No
2 30 No No