Rokonet ORBiT-14, Installation Manual

Page: 20 / 60

Installation Manual
14
Connecting the J4 Connector
The J4 connector (jumper) determines the UO1 connection (behaviour), which is
normally used for an external siren connection, as follows:
•
Positive (POS) : When the J4
connector is placed on POS, the
C terminal on UO1 receives
13.8V.
• Negative (NEG) : When the J4
connector is placed on NEG , the
C terminal on UO1 receives
COM.
• Single pin : If the J4 connector is
placed only on 1 pin , the UO1
acts as a dry contact.