Rokonet ORBiT-14, Installation Manual

Page: 26 / 60

Installation Manual
20
Operation Action Comments
Press keys Displayed Zone
LEDs
lit
Value
none 1
st
digit 2, 1 3
STAY STAY
2
nd
digit none 0
STAY STAY 3
rd
digit 3,1 5
STAY STAY
4
th
digit 3,2,1 7
5
Check the data
stored in Location
“008”
•
The first digit of the
stored data is displayed.
•
Observe the Zone LEDs.
•
Press [STAY] [STAY] to
advance to the next digit.
•
Once all four digits have
been displayed, attempts
to view an additional digit
will result in three (error)
beeps.
•
If desired, press [STAY]
and [ARM] to move
backwards.
6
Go to another
location of your
choice Press the desired 3-digit
location and
[ARM] .
Press [ARM] alone to go to the next
sequential location.
7
Exit programming Enter your Installer Code
and press [ARM] . (Only in
the LED keypad)
A long beep will confirm your actions.