19
3DISON AEP U
ser M
anual
FAQ
Is it possible to use material purchased from other companies?
-
We recommend to use Rokit
’
s certified filament to optimize output quality. You might not able to get After-Sales services if non
genuine filament was used.
Material
Is design also available from the dedicated 3DISON
’
s software (Creator K)?
-
The dedicated 3DISON
’
s software (Creator K) is an optimized program to enable a simple setting 3D printing whereby no design
correction is allowed. Manufacturing and designing of 3D modeling file must use 3D design program.
Is it possible to level the Heat-Bed manually?
-
3DISON AEP supports Auto-Leveling and Standard-Leveling. If you want Standard-Leveling, first Select [Utilities] > [Jog mode].
Second, manually level the left, right, front, back and center position. Third, uncheck [Auto-Leveling] option in G-Code window and
start printing. If you want to do Auto-Leveling, first select [Utilities] > [Level Build Plate]. Second adjust two Hot-End touching the bed
in center. Third, check [Auto-Leveling] option in G-Code window and start printing.
Software
Can MAX OS X use the dedicated 3DISON software (Creator K)?
-
Dedicated 3DISON
’
s software (Creator K) supports Window and Mac operating systems. These operating systems can be easily
installed and used.
