14
3DISON AEP U
ser M
anual
Start 3D Printing
Prepare STL or OBJ file you want
to print out. Access the website
(www.youniverse3d.com)
to
download STL or OBJ that you
want to print or save the filename
extension as STL or OBJ from 3D
modeling software.
Insert the SD card on the right of
the printer.
Select File and open in Creator
K, and choose STL file you want
to print or drag 3D image file to
Creator K.
Set the temperature by pressing
the button of passive temperature
control system after the Heat-
Bed is automatically turned on.
(Turn top Heat-Bed on when you
print
ULTEM
TM
resin grade 9085
only)
Keep “Preheat” status for
about 30 mins, when the tem
perature reaches hot setting.
(Stabilize the temperature of
Heat-Bed and preheat the air
inside)
Select the file in x3g format to
start printing on LCD panel.
(File only in .x3g is read)
First, select the printer type at the
top menu (Printer > Printer type
> EDISON AEP) and click the first
icon‘G-Code’ to generate G-
Code.
If G-Code is successfully generated,
color of SD card icon will change.
Then click SD card button to save
file in x3g format into SD card you
prepare.
1
5
2
6
7
8
3
4
How to use 3DISON AEP
※ ULTEM
TM
is a registered trademark of SABIC or its affiliates or subsidiaries.
