12
Attention
Rolling Brush Replacement
Press down the rolling
brush release button
Place on ground with electric brush upside down, press down
and spring up the rolling brush release button, remove the
rolling brush release button; remove the rolling brush, clamp
the rolling brush into the roll wheel installation position, cover
with the rolling brush fixing block, remove the rolling brush to
clean the surface attachment.
Rolling brush cleaning: use a cleaning brush to lift and cut
off the attached hair and fibrous substances on the rolling
brush, there after it is separated from the rolling brush.
1.Turn off the power and unplug the adapter when replacing the rolling brush;
2.The cleaning brush has a sharp blade, which is used to cut off anything un-cleanable entanglement around. Children should not be exposed to
the cleaning brush;
3.Do not allow the children to swallow the rolling brush fixed block;
4.Not to lose the rolling brush fixed block, do not use electric brush without the rolling brush release button.
Product Troubleshooting
When the vacuum cleaner can't operate normally, troubleshoot or contact the customer service in time.
Fault Description
Motor Not Working
Rolling Brush Not Running
Suction Power Reduction
The air inlet pipe of electric brush was blocked
or the brush can’t work
The dust cup is full
Long running, high temperature
The filter is covered with dust
Paper or wool fibers clogged in metal mesh holes
Air duct between dust cup and host is clogged
Low battery
Fault Causes
Rolling brush has too much entanglement,
such as hair fiber and other long impurities
The power adapter is not properly plugged in
Charger Indicator LEDs Not On or
Not Flashing During Charging
Clean up the garbage that is attached to the
electric rolling brush
Empty the dust
Restart the machine for use after static cooling
Clean or replace the filter
Regularly check if there is garbage in the air duct
between dust cup and main machine
Regularly check if the metal mesh is clogged
Charge the vacuum cleaner
Replace with the carbon fiber rolling brush and
change the use environment
Clean up the brush entanglement
Solutions
Regularly check if the power adapter is plugged
in properly
Soft velvet rolling brushes are used on
unsuitable surfaces
