6
Mattress Brush
Accessories
Multi-function Brush
(Assembly with Long
Flat Suction)
Sofa Brush
Long Flat Suction
Accessory Installation
Attention
Product Installation
Main Machine Installation
Adapter
Fittings
Cleaning Brush
Wall Suction Fixing Box
Soft Velvet Rolling Brush
1. Take out the electric brush and metal connecting rod, insert
the end with release button of the electric brush into the
corresponding port of the metal connecting rod vertically as
shown in the figure, until it clicks into the right position.
2. Take out the main machine and metal connecting rod. Insert
the metal connecting rod into the corresponding port of the
main machine vertically, until it clicks into the right position.
1. Be careful when installing electric brush to avoid gripping hand;
2. Before installing the electric brush, make sure the metal contact is clean and dry, to avoid unnecessary damage caused by short circuit during
use due to insufficient connection or water.
For the convenience of use, this product is specially equipped with accessories for the main machine of the vacuum cleaner. When the main
machine of the vacuum cleaner is used separately, it can be connected to the accessories directly as required.
1. Connection of long flat suction: insert the end with release
button of the long flat suction into the corresponding port of the
main machine, until it clicks into right position.
2. Sofa Brush Installation
Put the sofa brush flat mouth upward, insert into the long
flat suction along the direction shown below vertically, until
it clicks into right position.
Tips:
The attachment of the vacuum cleaner main machine can be directly connected with the extension hose and the mattress brush. The connection
mode is the same as that of the long flat suction. Sofa brush can also be directly connected to the extension hose, and the connection mode is
the same as long flat suction connection mode.
