Attention
1.Do not drag the winding objects of cyclone mechanism forcibly to avoid damaging of the metal mesh;
2.Dry naturally after washing to avoid corrosion;
3.Please use the original filter to avoid the damage due to being unsuitable to the vacuum cleaner;
4. Please use the cleaning brush provided by the original factory. Do not use others steel brushes or brushes with stronger hardness.
Install dust cup with cover: click the anti-off button, insert the dust
cup following the diagram counterclockwise until you hear it clicks
Dust Dumping: dump the dust cup with cover on garbage
collection device for dumping.
Attention
1.When installing the filter, install the filter in the corresponding direction of dust cup cover;
2.When installing the dust cup, make sure that the dust cup anti-off button has been installed in the right place to prevent the fall and damage
on to the foot or the floor.
2. The dust cup and metal mesh cleaning: clean the dust cup
and metal mesh with clean water and use after drying to
prevent dust caking
．
1. The cyclone mechanism cleaning: take out the cyclone
mechanism from dust cup; clean the dust and hairs attached in
the metal mesh and the duct
．
Dust Cup Component Cleaning
3. Filter cleanliness: take out the filter, clean suspended dust with
a brush and wash it. If necessary, replace the specified filter.
It is recommended to replace the specified filter every 3 months
to ensure cleanness.
11
