PJDK71351-03
MK71351
23/24
9) Although LAPIS Semiconductor is continuously working to improve product reliability and quality, semiconductors can
break down and malfunction due to various factors. Therefore, if product malfunctions may result in serious damage,
including that to human life, sufficient fail-safe measures must be taken, including the following:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits in the case of single-circuit failure
10) Failure induced under deviant condition from what defined in the Specification cannot be guaranteed.
11) This product is a specification to radiate the radio wave. It is necessary to acquire the attestation of decided Radio Law of
each region used to use the equipment that radiates the radio wave.
Please inquire about the attestation of Radio Law that this product acquires.
12) When product safety related problems arises, please immediately inform to LAPIS Semiconductor, and consider technical
counter measure.
●Precautions for Reference Circuits
1) If change is made to the constant of an external circuit, allow a sufficient margin due to variations of the characteristics of
the Products and external components, including transient characteristics, as well as static characteristics.
2) The reference circuit examples, their constants, and other types of information contained herein are applicable only when
the Products are used in accordance with standard methods. Therefore, if mass production is intended, sufficient
consideration to external conditions must be made.
● Precaution for Electrostatic
This product is Electrostatic sensitive product, which may be damaged due to Electrostatic discharge. Please take proper
caution during manufacturing and storing so that voltage exceeding Product maximum rating won't be applied to the Products.
Please take special care under dry condition (Grounding of human body / equipment / solder iron, isolation from charged
objects, setting of Ionizer, friction prevention and temperature / humidity control etc.)
● Precautions for Storage / Transportation
1) Product performance and connector mating may deteriorate if the Products are stored in the following places:
[a] Where the Products are exposed to sea winds or corrosive gases, including Cl
2
, H
2
S, NH
3
, SO
2
and NO
2
[b] Where the temperature or humidity exceeds those recommended by LAPIS Semiconductor
Temperature: 5°C to 40°C, Humidity 40% to 60%
[c] Storage in direct sunshine or condensation.
[d] Storage in high Electrostatic.
2) Even under LAPIS Semiconductor recommended storage condition, connector mating, mountability, and heat resistance
of products over 1 year old may be degraded.
3) Store / transport cartons in the correct direction, which is indicated on a carton as a symbol, otherwise bent leads may occur
due to excessive stress applied when dropping of a carton.
● Precaution for Product Label
QR code printed on LAPIS Semiconductor product label is only for internal use, and please do not use at customer site.
It might contain internal products information that is inconsistent with product information.
● Precaution for Disposition
When disposing products , please dispose them properly with an industry waste company.
● Prohibition Regarding Intellectual Property
LAPIS Semiconductor prohibits the purchaser of the Products to exercise or use the intellectual property rights, industrial
property rights, or any other rights that either belong to or are controlled by LAPIS Semiconductor, other than the right to use,
sell, or dispose of the Products.
