Rohde & Schwarz SMM-K507, User Manual, Page: 36 / 51

Remote control commands
R&S
®
SMM-K507
36 User Manual 1179.5718.02 ─ 02
Manual operation: See "Address Mode" on page 23
:SYSTem:COMMunicate:BB<hw>:QSFP:NETWork:IPADdress <IpAddress>
Sets the IP address.
Parameters:
<IpAddress> String
Range:
0.0.0.0 to ff.ff.ff.ff
Example: See Example"Configuring the QSFP+ network" on page 34.
Manual operation: See "IP Address" on page 24
:SYSTem:COMMunicate:BB<hw>:QSFP:NETWork[:IPADdress]:SUBNet:MASK
<SubnetMask>
Sets the subnet mask.
Parameters:
<SubnetMask> String
Example: See Example"Configuring the QSFP+ network" on page 34.
Manual operation: See "Subnet Mask" on page 24
:SYSTem:COMMunicate:BB<hw>:QSFP:NETWork:MACaddress?
Queries the MAC address of the network adapter.
This is a password-protected function. Unlock the protection level 1 to access it,
see
:SYSTem:PROTect<ch>[:STATe]
in the R&S SMM100A user manual.
Return values:
<MacAddress> string
Example: See Example"Configuring the QSFP+ network" on page 34.
Usage: Query only
Manual operation: See "MAC Address" on page 24
:SYSTem:COMMunicate:BB<hw>:QSFP:NETWork:PROTocol <Protocol>
Displays the communication protocol for the network traffic.
Parameters:
<Protocol> UDP
*RST:
n.a. (factory preset: UDP)
Example: See Example"Configuring the QSFP+ network" on page 34.
Manual operation: See "Protocol" on page 24
QSFP+ network commands