Rohde & Schwarz SMM-K507, User Manual, Page: 35 / 51

Remote control commands
R&S
®
SMM-K507
35 User Manual 1179.5718.02 ─ 02
Example: See Example"Configuring the QSFP+ network" on page 34.
Usage: Query only
Manual operation: See "Network Status" on page 23
:SYSTem:COMMunicate:BB<hw>:QSFP:NETWork:APPLication?
Queries a running application.
Return values:
<RunningApp> string
Returns the name of the running application.
ARB Upload (10/40GbE)
ARB Ethernet upload 10/40 Gbit Ethernet mode
Example: See Example"Configuring the QSFP+ network" on page 34.
Usage: Query only
Options: ARB Upload (10GbE)|ARB Upload (40GbE) require R&S SMM-
K507.
ExtSeq (10GbE) requires R&S
SMM-K506.
Manual operation: See "Running Application" on page 23
:SYSTem:COMMunicate:BB<hw>:QSFP:NETWork[:COMMon]:HOSTname?
Queries an individual hostname for the vector signal generator.
Note: We recommend that you do not change the hostname to avoid problems with the
network connection. If you change the hostname, be sure to use a unique name.
This is a password-protected function. Unlock the protection level 1 to access it,
see
:SYSTem:PROTect<ch>[:STATe]
.
Return values:
<Hostname> string
Example: See Example"Configuring the QSFP+ network" on page 34.
Usage: Query only
Manual operation: See "Hostname" on page 23
:SYSTem:COMMunicate:BB<hw>:QSFP:NETWork:IPADdress:MODE
<IpAddressMode>
Displays the mode of the IP address.
Parameters:
<IpAddressMode> STATic
*RST:
n.a. (factory preset: STATic)
Example: See Example"Configuring the QSFP+ network" on page 34.
QSFP+ network commands