Rohde & Schwarz SMM-K507, User Manual, Page: 29 / 51

Remote control commands
R&S
®
SMM-K507
29 User Manual 1179.5718.02 ─ 02
"Running"
Plays the waveform, that is loaded into the ARB memory of the
R&S
SMM100A.
Example: See Example"Activating ARB Ethernet upload" on page 27.
Usage: Query only
Manual operation: See "Status" on page 19
[:SOURce<hw>]:BB:ARBitrary:ETHernet:WAVeform:COUNter?
Queries the number of waveforms that are uploaded to and already played from the
ARB memory.
Return values:
<WaveformCounter> integer
Example: See Example"Activating ARB Ethernet upload" on page 27.
Usage: Query only
Manual operation: See "Waveform Counter" on page 20
[:SOURce<hw>]:BB:ARBitrary:ETHernet:WAVeform:INFO?
Queries information about the currently played waveform in a comma-separated list.
The table below list all parameters that are queried.
Parameter Description
Waveform counter Integer number of played waveforms
Comment Waveform name or comment tag
Clock Clock rate in Hz
Marker x Marker mode for marker x. x can be 1 to 3.
Peak level RF signal peak level
RMS level RF signal RMS level
Samples Number of played waveform samples
Example: See Example"Activating ARB Ethernet upload" on page 27.
Usage: Query only
Manual operation: See "Waveform Info" on page 20
[:SOURce<hw>]:BB:ARBitrary:ETHernet:WAVeform:TAG? <TagName>
Queries waveform tags defined in the waveform file with extension
*.wv
.
General commands