Rohde & Schwarz SMM-K507, User Manual, Page: 23 / 51

ARB ethernet upload configuration and settings
R&S
®
SMM-K507
23 User Manual 1179.5718.02 ─ 02
Address Mode ............................................................................................................... 23
IP Address .....................................................................................................................24
Subnet Mask ................................................................................................................. 24
MAC Address ................................................................................................................ 24
Protocol ......................................................................................................................... 24
UDP Port ....................................................................................................................... 24
Network Status
Indicates that the instrument is connected to the network.
Remote command:
:SYSTem:COMMunicate:BB<hw>:QSFP:NETWork:STATus?
on page 34
Running Application
Indicates the application that currently uses the QSFP+ network configuration.
"ARB Upload (10GbE)/(40GbE)"
ARB ethernet upload using 10 Gbit or 40 Gbit ethernet connection.
Remote command:
:SYSTem:COMMunicate:BB<hw>:QSFP:NETWork:APPLication?
on page 35
Hostname
Displays the hostname. The hostname consists of the R&S SMM100A short name
<instrument>
, the serial number
<serial number>
and the connector of the
QSFP+ interface
<HS-DIG-IQx>
.
Each instrument is delivered with an assigned hostname, a logical name which can be
used instead of the IP address. With the default network settings, the IP address is
allocated by the DHCP server. This address can change each time the instrument is
reconnected. Unlike the IP address, the hostname name does not change.
Note:
This function is password-protected. Unlock the protection level 1 to access it.
We recommend that you do not change the default network settings or the hostname
to avoid problems with the network connection.
If you change the hostname, be sure to use a unique name.
Remote command:
:SYSTem:COMMunicate:BB<hw>:QSFP:NETWork[:COMMon]:HOSTname?
on page 35
Address Mode
Indicates that IP addresses are assigned in static mode, i.e. the IP address is assigned
manually.
NOTICE! Risk of network failure.
Consult your network administrator before performing the following tasks:
●
Connecting the instrument to the network
●
Configuring the network
●
Changing IP addresses
Errors can affect the entire network.
Local QSFP network settings