Subject to change without notice
7
P r o b e R T- Z S 1 0 L
About the Probe RT-ZS10L
Rohde & Schwarz presents a unique Inline Pro
-
bing System – the
RT-ZS10L active probe
which can
contact adjacent square pins in 2.54 mm pitch
simultaneously. The probe‘s housing is T-shaped
so that many probes can be positioned next to
each other in a never ending chain.
Like this a number of measurements can be per
-
formed at the same time. The
RT-ZS10L active probe
is system-independant and its standard BNC
connector can be plugged onto any measuring
instrument with a 50Ω input.
With an input resistance of 1 MΩ and an input
capacitance of 0.9 pF the
RT-ZS10L active probe
is
suitable for measurements in all frequency ran
-
ges. Compared to passive probes the
RT-ZS10L
active probe
offers a high input impedance into the
GHz-range. Passive probes with their relative high
input capacitance load the signal source already
at frequencies above 100 kHz.
That´s why the
RT-ZS10L active probe
with its high in
-
put resistance and its low input capacitance is the
ideal probe for most of your daily measurements.
The RT-ZS10L testing adjacent pins in 2.54 mm
Pitch
Included in delivery
The following items are included in the scope of delivery.
Please check the delivery for completeness. If any item is
missing, send a message to our service department and we
will send you this item immediately.
Item
Qty
Instruction Manual
1
Spring Tip 0.5 mm
1
Solid Tip 0.5 mm
1
Ground Blade
1
Marker Bands 4 colors
1
L-In Adapter
1
Ground Lead 6 cm
1
Ground Lead 12 cm
1
Ground Lead 90° 5cm
1
Ground Lead 90° 10cm
1
Power Supply
1
PicohookTM black
1
PicohookTM red
1
Protection Cap 2.5
1
self adhesive Cu Pad (2 x 2 cm)
2
Probe
1
Y-Lead Adapter to 0.8mm sockets
1
Z-Ground
1
Use ground lead only for connections to earth ground
The accessories provided with the probe have been
safety tested. Do not use any other accessories than
those “originally” provided.
