Remote Control Commands
R&S
®
NGA100
103
User Manual 5601.8919.02 ─ 03
TRIGger[:ENABle]:DIO<IO>
<arg0>
This command sets or queries the state of the specified Digital I/O line.
The state is disabled when any setting has been changed.
Suffix:
<IO>
.
1..4
Parameters:
<arg0>
{OFF | ON}
ON
Enable the state for Digital I/O line.
OFF
Disable the state for Digital I/O line.
*RST:
OFF
TRIGger:IN:ARBitrary:DIO<IO>
<arg0>
This command sets or queries the operation mode when starting EasyArb by Trig IN.
Suffix:
<IO>
.
1..4
Parameters:
<arg0>
PULSe | LEVel
PULSe
Starts EasyArb when trigger signal activated.
LEVel
Starts EasyArb when trigger signal activated and stops when
trigger signal de-activated.
*RST:
PULSe
Example:
TRIG:IN:ARB:DIO1 PULS
TRIGger:IN:RESPonse:DIO<IO>
<arg0>
This command sets or queries the output response of the trigger input of the specified
Digital I/O line.
Suffix:
<IO>
.
1..4
Parameters:
<arg0>
ON | OFF | TOGGle | INHibit | ARBitrary
ON
Output is switched on.
OFF
Output is switched off.
TOGGle
Output state is toggled.
Advanced Operating Commands
