manualshive.com logo in svg

Rohde & Schwarz ESRP, Getting Started

Share
Download
Rohde & Schwarz ESRP Getting Started Download Page 65

Basic Operations

R&S

®

ESRP

65

Getting Started 1316.4697.02 ─ 07

Hiding softkeys

You can hide the softkey display, e.g. when using remote control, in order to
enlarge the display area for the measurement results. When you press a function
key on the front panel, the softkeys are displayed temporarily, enabling you to
perform a certain task with the softkeys. They are then automatically hidden again
when they have not been used for a specified time. Any edit dialog boxes
required for entry remain in the display.

1. Press the [DISPLAY] key.

2. In the "Display Settings" dialog box, select "Softkey Bar State: Off".

The softkeys are no longer displayed.

► To display the softkeys again, select "Softkey Bar State: On".

Remote:

DISP:SKEY:STAT OFF

6.2.8

 

Context-sensitive Menus

Markers and traces in the display, as well as the information in the channel bar,
have context-sensitive menus. If you right-click on a marker or trace in the dis-
play, or information in the channel bar (or touch it for about 1 second), a menu is
displayed which contains the same functions as the corresponding softkey. This is
useful, for example, when the softkey display is hidden (see 

Chapter 6.2.7, "Soft-

keys"

, 

on page 63).

Means of User Interaction

Summary of Contents for ESRP





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands