Preparing For Use
R&S
®
ESRP
39
Getting Started 1316.4697.02 ─ 07
To shut down the product
The product is in the ready state.
► Press the [Power] key.
The operating system shuts down. The LED changes to orange.
If the instrument temperature exceeds the limit specified in the data sheet,
the R&S
ESRP automatically shuts down to protect the instrument from
damage.
To disconnect from power
The R&S
ESRP is in the standby state.
1.
NOTICE!
Risk of data loss. If you disconnect the product from power when it
is in the ready state, you can lose settings and data. Shut it down first.
Set the switch on the power supply to position [0].
See
Chapter 4.2.1, "AC Power Supply Connection and Main Power Switch"
on page 29.
The LED of the Power key is switched off.
2. Disconnect the R&S
ESRP from the power source.
5.10
Connecting to LAN
You can connect the instrument to a LAN for remote operation via a PC.
For details on the connector, see
Provided the network administrator has assigned you the appropriate rights and
adapted the Windows firewall configuration, you can use the interface, for exam-
ple:
●
To transfer data between a controlling device and the test device, e.g. to run a
remote control program
●
To access or control the measurement from a remote computer using the
"Remote Desktop" application (or a similar tool)
●
To connect external network devices (e.g. printers)
●
To transfer data from a remote computer and back, e.g. using network folders
Connecting to LAN
