Instrument Tour
R&S
®
ESRP
27
Getting Started 1316.4697.02 ─ 07
The RF Input supports a frequency range from 9
kHz to f
max
and an attenuation
range from 0
dB to 70
dB.
With option R&S
R&S
ESRP-B29, the minimum frequency is extended to 10
Hz.
4.1.6
Probe Power
The R&S
ESRP provides two connectors to supply accessories like transducers
or probes with power.
The probe power connector with five pins supports supply voltages of ±10
V and
ground. The maximum permissible current is 200
mA. This probe power connec-
tor is suitable, for example, for transducers from Rohde
&
Schwarz.
The probe power connector with three pins supports supply voltages from +15
V
to -12.6
V and ground. The maximum permissible current is 150
mA. This probe
power connector is suitable, for example, for high-impedance probes from Agi-
lent.
4.1.7
AF Output
Headphones equipped with a miniature jack plug can be connected to the AF out-
put female connector. The internal impedance is 10
Ω. The output voltage can be
set by using the volume control to the right of the female connector. If a plug is
connected, the internal loudspeaker is automatically switched off.
See also
4.1.8
Tracking Generator Output (Optional)
The R&S
ESRP is equipped with an optional tracking generator and therefore
provides a tracking generator output connector.
The output of the tracking generator is connected to the DUT via a cable equip-
ped with a male N connector. The female connector is available only with the
tracking generator option (R&S
FSV-B9).
The Front Panel
