Preparing For Use
R&S
®
ESRP
36
Getting Started 1316.4697.02 ─ 07
5.6
Mounting the R&S
ESRP in a Rack
To prepare the rack
1. Observe the requirements and instructions in
2.
NOTICE!
Insufficient airflow can cause overheating and damage the product.
Design and implement an efficient ventilation concept for the rack.
To mount the R&S
ESRP in a rack
1. Use an adapter kit to prepare the R&S
ESRP for rack mounting.
a) Order the rack adapter kit designed for the R&S
ESRP. For the order num-
ber, see the data sheet.
b) Mount the adapter kit. Follow the assembly instructions provided with the
adapter kit.
2. Lift the R&S
ESRP to shelf height.
3. Grab the handles and push the R&S
ESRP onto the shelf until the rack brack-
ets fit closely to the rack.
4. Tighten all screws in the rack brackets with a tightening torque of 1.2
Nm to
secure the R&S
ESRP in the rack.
To unmount the R&S
ESRP from a rack
1. Loosen the screws at the rack brackets.
2. Remove the R&S
ESRP from the rack.
3. If placing the R&S
ESRP on a bench top again, unmount the adapter kit from
the R&S
ESRP. Follow the instructions provided with the adapter kit.
5.7
Connecting the AC Power
The R&S
ESRP is equipped with an AC power supply connector.
Connecting the AC Power
