Rohde & Schwarz DVS SpycerBox Flex, Hardware Manual

Page: 12 / 76

1-2
SpycerBox Ultra/Flex Hardware Guide
1.1 Overview
This guide informs you about the installation of the SpycerBox hard-
ware, its operation as well as all connection possibilities. Furthermore,
it describes maintenance tasks that you may carry out on your own.
The chapters contain the following information:
Chapter 1 Begins with a short introduction to the Spycer-
Box, followed by a note regarding the audience
this manual is written for and an explanation of
the conventions used in this manual. Further-
more, it provides safety instructions that you
must adhere to and some important notes that
you should observe.
Chapter 2 This chapter gives a front and rear overview of
the system detailing all items, connectors and
interfaces. Additionally, it contains some fur-
ther information, for example, about the bat-
tery backup unit.
Chapter 3 Describes the hardware installation of the DVS
system.
Chapter 4 Explains how to operate the DVS system, i.e.
how to start and shut down the device. Addi-
tionally, the DVS Configuration Tool is de-
scribed briefly.
Chapter 5 Details maintenance work, for example, in case
of a hard disk, fan or power supply unit failure.
Appendix Provides technical details and general informa-
tion about the hardware of the DVS system.
Furthermore, it gives hints how to resolve irreg-
ularities during operation.
Index This chapter facilitates the search for specific
terms.