Rohde & Schwarz DVS SpycerBox Flex, Hardware Manual, Page: 31 / 76

2-13
Overview
2
1
3
4
5
I
A
2.3.3 ATX Connector Panel
The ATX connector panel on the rear of the DVS system holds the con-
nectors of the computer system. It provides the following connections:
Figure 2-13: ATX connector panel on rear
No. Item Explanation
1 mouse PS/2 connector to connect a mouse to the
system
2 COM port RS-232 connector for the connection of se-
rial interface devices
3 IPMI Dedicated LAN port for IPMI 2.0 (Intelligent
Platform Management Interface) providing
KVM (Keyboard, Video, Mouse redirection)
as well; for further information see the doc-
umentation(s) of the original manufactur-
er(s)
IPMI can be activated by assigning
an IP address to its port via the DVS
Configuration Tool (see section
“DVS Configuration Tool” on
page 4-3). After the assignment
you may have to wait several min-
utes before the configuration takes
effect.
4 CEN/LFE Connector for center out and subwoofer
speakers
5 line in Connector to input audio signals
6 keyboard PS/2 connector to connect a keyboard to
the system
1
6
2
8 9 10 13
4 5
14 11 12
3
7