Rohde & Schwarz DVS SpycerBox Flex, Hardware Manual

Page: 34 / 76

2-16
SpycerBox Ultra/Flex Hardware Guide
The above layout of the slot panel area is just an example. The one at
your system may differ from the figure above: The position of the indi-
vidual slot panels may vary and/or other panels may be installed, either
for internal reasons or on your request.
To provide connections to most networks there are various interface
possibilities optionally available for the SpycerBox, such as the follow-
ing:
The DVS system provides furthermore the following connection possi-
bilities by default:
Gigabit Ethernet Either a 1 Gigabit Ethernet connection with four
ports or a 10 or 40 Gigabit Ethernet connection
with up to two ports.
Fibre Channel Fibre Channel connection interface with up to
four ports.
FireWire Two port FireWire interface.
eSata eSata interface
USB Additional USB 2.0 or 3.0 connection interface
graphics card The monitor for the DVS system has to be con-
nected here. For further information about the
graphics card, please refer to the original manu-
facturer’s documentation included in the deliv-
ery of the system.
SAS The SAS (serial attached SCSI) connector is an
external mini-SAS (SFF-8088) connector that
can be used to connect external storages. An
external storage connected to this port can even
be configured to provide RAID protection.
Data transfers on this port may inter-
fere with the real-time capability of the
DVS system. It is recommended to use
it only at times when no real-time per-
formance is required.