Rohde & Schwarz DVS SpycerBox Flex Hardware Manual Download Page 66

Page: 66 / 76

A-4

SpycerBox Ultra/Flex Hardware Guide

A.2 Technical Data

This section provides technical data of the SpycerBox.

A.2.1 General Technical Data

The general technical data of the SpycerBox are as follows:

When installing the DVS system in a rack, take care that
warmed up air is conducted to the rear of the rack and properly
vented away.

Weight

approx. 70 kg

Environment (also
during transport)

No exposure to heat

No exposure to strong electric or magnetic
fields

No vibrations/shocks allowed

Operating
temperature

Maximum:

10 - 30 °C (50 - 86 °F)

Optimum:

15 - 25 °C (59 - 77 °F)

Storage tempera-
ture

0 - 50 °C (32 - 122 °F)

Humidity

10 - 80 %, non-condensing at all times

Air

Dust-free

Power consumption max. 2500 W (primary)

nominal 1400 W (primary)

AC power

100 - 120 VAC, 220 - 240 VAC

Summary of Contents for DVS SpycerBox Flex













































































Search results

Summary of Contents for DVS SpycerBox Flex

Reviews:

Brands by name

Popular brands

Rohde & Schwarz DVS SpycerBox Flex, Hardware Manual

Search results

Summary of Contents for DVS SpycerBox Flex

Reviews:

Brands by name

Popular brands