Command Reference
R&S
®
CMW-KM645
60
User Manual 1173.9740.02 ─ 04
<2_OutOfTol>
Out of tolerance result, i.e. percentage of measurement intervals
in the statistics cycle (
on page 44) exceeding the speci-
.
Range:
0 % to 100 %
Default unit: %
<3_WeightedRMS>
Frequency deviation measured with a weighting filter, RMS aver-
age
Range:
0 Hz to +96 kHz
Default unit: Hz
<4_BandpassRMS> Frequency deviation measured with a variable bandpass filter,
RMS average
Range:
0 Hz to +96 kHz
Default unit: Hz
<5_THDPerc>
Total harmonic distortion in percent
Range:
0 % to 100 %
Default unit: %
<6_THDdB>
Total harmonic distortion in dB
Range:
-120 dB to 0 dB
Default unit: dB
<7_THDN>
Total harmonic distortion and noise in percent
Range:
0 % to 100 %
Default unit: %
<8_SINAD>
Signal to noise and distortion ratio
Range:
0 dB to 120 dB
Default unit: dB
<9_SNR>
Signal to noise ratio
Range:
0 dB to 120 dB
Default unit: dB
<10_CarrierPower>
Carrier power
Range:
-13.0 dBm to 55.0 dBm
Default unit: dBm
<11_AudioRightDev> Audio right deviation
Range:
0 Hz to +96 kHz
Default unit: Hz
Example:
See
Continuous and AF Measurements
Usage:
Query only
Firmware/Software:
V1.0.15.20
Measurement Results
深圳德标仪器
135-1095-0799
