Maintenance
SSD Disk Maintenance
CLIPSTER
48
User Manual (Hardware) | 2904.4460.02 - 04
SSD Disk Removal
The SSD disks that are accessible at the front of the system are connected
to the system with the help of disk carriers. They can be removed easily,
even when the system is running (hot-swappable).
Perform the following steps:
1.
If applicable, stop all accesses to the SSD disk array of your system, for
example, by exiting the video system software and severing the network
connections.
2.
Remove the front cover of the system, see section “Removing the Front
Cover” on page 46.
3.
Unlatch the disk carrier of the defective SSD disk by pressing the release
button of the tray lever to loosen the lever.
This will cause the lever to come out of the disk carrier so that it
protrudes from the rest of the disk carriers.
Log Files
Before replacing a SSD disk you have to collect the log files
of the RAID controller. If you know how to do this you may
proceed on your own. If not, please contact the
Rohde & Schwarz service department first.
