Operating the instrument
R&S
®
RTO6
56
Getting Started 1801.6670.02 ─ 04
The following list describes at first the default toolbar functions and then the addi-
tional functions.
Undo
Undoes the last setting actions step by step. Some actions cannot be
revoked: locking the touchscreen with [Touch Lock], and saving data. The undo
stack is deleted during the following actions: Reloading settings from file, refer-
ence waveform actions (save, load and preset with active reference waveform),
and some actions that require an internal re-alignment to ensure correct mea-
surements.
Redo
Recovers the undo steps in reverse order.
Help
Enables the tooltip display. A short description appears when you tap a
parameter in a dialog. To open the corresponding help topic, tap the "Show Help"
button in the lower right corner of the tooltip. See also:
Recall
Opens a window to select and load instrument settings that were previ-
ously stored in a saveset. A graphical preview helps you to find the required set-
tings.
Save
Saves the current instrument settings in a saveset.
You can reload the saveset using the "Recall" toolbar icon, or using "Menu" >
"Save/Recall" > "Recall" tab > "Saveset with preview".
The filename is created according to the autonaming pattern, defined in "Menu" >
"Settings" > "Save/Recall" > "Autonaming" tab.
Image
Saves a screenshot of the current display using the settings defined in
"Menu" >"Save/Recall" > "Save" tab > "Screenshot".
Report
Creates a report of the current measurement settings and results using the
settings defined in "Menu" > "Save/Recall" > "Save" tab > "Report".
Toolbar
