Rohde & Schwarz 1328.6660K02, Getting Started

Page: 12 / 19

Preparing for use
R&S
®
FPC
12 Getting Started 1328.7409.02 ─ 05
3.4.1 Placing the R&S FPC on a bench top
To place the product on a bench top
1. Place the product on a stable, flat and level surface. Ensure that the surface
can support the weight of the product. For information on the weight, see the
data sheet.
2. CAUTION! Foldable feet can collapse. See "Setting up the product"
on page 4.
Always fold the feet completely in or out. With folded-out feet, do not place
anything on top or underneath.
3. Alternatively, you can mount several products in a rack.
3.4.2 Mounting the R&S FPC in a rack
To prepare the rack
1. Observe the requirements and instructions in "Setting up the product"
on page 4.
2. NOTICE! Insufficient airflow can cause overheating and damage the product.
Design and implement an efficient ventilation concept for the rack.
To mount the R&S FPC in a rack
1. Use an adapter kit to prepare the R&S FPC for mounting.
a) Order the rack adapter kit designed for the R&S FPC (19" rack mount kit
R&S ZZA-FPC1 order no. 1328.7080.02).
b) Mount the adapter kit. Follow the installation instructions provided with the
adapter kit.
2. Lift the R&S FPC to shelf height.
3. Push the R&S FPC onto the shelf until the rack brackets fit closely to the rack.
4. Tighten all screws in the rack brackets with a tightening torque of 1.2Nm to
secure the R&S FPC in the rack.
Setting up the R&S FPC