Roger PRT12EM, Installation And Programming Manual

Page: 36 / 59

PRT-EM Series Readers fv 1.29 and 2.29 Rev. J.doc 2012-01-05
Page 36 from 59
is set to 00s output it activated for unlimited time - till
moment when reader changes its arming mode again.
56 Intruder Alarm Output, line is triggered in the moment when Intruder
Alarm arise. Output remains active for time defined by
Intruder Timer however whenever reader changes its
arming mode this output is immediately cleared. When
corresponding timer is set to 00s output it activated for
unlimited time - till moment when reader changes its arming
mode again.
57 General Alarm Output, line is triggered in the moment when Tamper Alarm
or Intruder Alarm arise. Output remain active for a time
defined by General Alarm Timer however whenever reader
changes its arming mode this output is immediately cleared.
When corresponding timer is set to 00s output it activated for
unlimited time - till moment when reader changes its arming
mode again.
58 Door Unlock Time Output, line is triggered in the moment when access is
granted and remains active for the entire time when door
lock is released (same as
Door Unlock Time ).
59 Door Open Timeout Output, line is active for the entire time when reader waits
for a door to become closed (same as Door Open Timeout ).
60 Duress Alarm Output, line is triggered in the moment when Duress Alarm
arise. Output remains active for time defined by Duress
Alarm Timer however whenever reader changes its arming
mode this output is immediately cleared.
61 LED STATUS Timer Output, line is triggered in the moment when reader changes
its arming mode and remains active as long as LED STATUS
presents actual arming mode.
64 Door Lock Inverted Output, same as [41]: Door Lock but inverted (normally
this output is on, when triggered it goes off).