Roger PRT12 v1.3, Installation And Programming Manual

Page: 26 / 40

PRT12 v1.3 fv75.6 EN Rev.D.doc 10/22/2007
_________________________________________________________________________________________
Page 26 of 40
10. Appendix
Connection Wires Assignments
Offline mode
Wire
Color
Label
Simple Stand-alone
mode
Full Stand-alone
mode
Online mode
(unit connected to host ACU)
Red
+12V Supply input plus.
Blue
GND Supply input minus.
Green
CLK
Can be configured as
an input or output. CLOCK
communication line. DATA 0 line for Wiegand formats
CLOCK for Magstripe and RACS
formats.
Brown
DTA
Can be configured as
an input or output. DATA
communication line. DATA 1 line for Wiegand formats
DATA for Magstripe and RACS
formats.
Yellow
IN1
Input line, can be configured to several
available functions). In Wiegand and Magstripe formats,
the IN1 line activated by shorting it
with the supply minus. When IN1 is
triggered it turns the LED OPEN to
on and also activates acoustic signal
on the internal buzzer.
Grey
White
TAMP
Isolated, tamper switch contacts, when case is closed contacts are shorted.
Pink
NC Not used (reserved for further use)
Shield
None Cable shield is internally connected with supply minus (GND)
Technical Specification
Input voltage 10...15 VDC
Current consumption Avg. 60 mA
Anti-sabotage protection
(Tamper) NC contact, 50mA/24V, IP67
Reading distance Up to 12 cm for ISO cards (depends on cards).
Proximity cards
EM UNIQUE 125 kHz, ASK modulation, 64 bits (compatible with
EM4100/4102).
Communication distance
Between ACU and PRT reader in ONLINE mode: max. 150 m.
Between main PRT reader and second PRT reader: max. 150 m.
Between main PRT reader and XM-2 extension module: max. 150 m.
Environmental class
(according to EN 50131-1) Class IV, Outdoor-General, temperature: -25°C- +60°C, relative humidity:
10 to 95% (non-condensing).
Ingress protection IP 65
Dimensions H100 X W40 X D25 mm
Weight ~150 g
Approvals CE