Roger PRT12 v1.3, Installation And Programming Manual, Page: 11 / 40

PRT12 v1.3 fv75.6 EN Rev.D.doc 10/22/2007
_________________________________________________________________________________________
Page 11 of 40
direction) is referred to hereinafter as “rearming”. The term “arming” should be
understood here as the action effecting a switch into the
Armed mode, whereas the
term “disarming” a switch into the Disarmed mode.
Reader rearming operation can be done by TOGGLE or TOGGLE LTD users. The
action needed by a TOGGLE user to rearm the reader is to read twice the TOGGLE
card or to enter twice the TOGGLE PIN code — however, when the reader operates
with the
Card and PIN mode, user needs to do both things, read a card and enter a
PIN code. TOGGLE LTD users may arm/disarm a reader simply by a single use of
their identification tag (card, PIN or both when
Card+PIN option is active).
Note: If the reader operates with an input line configured to option Arming
Disabled , then the arming of a reader can be carried out providing that the input
configured as Arming Disabled is not triggered, when these input is triggered
(active) every attempt to arm a reader will be rejected. The condition of Arming
Disabled input does not affects disarming of a reader.
6 . 5 . 1 . E x a m p l e s
Example 1: Rearm the reader by presenting a TOGGLE user card.
 Read your TOGGLE user card
 Once accepted the reader grants you access and its LED SYSTEM starts
blinking
 With the LED SYSTEM blinking, once more present your TOGGLE card
 The reader changes its arming state (the LED STATUS will change
illumination color)
Note: If the option Access disabled when reader armed is enabled and the
reader is in Armed mode, then in order to unlock a door first you will have to switch
the reader to Disarmed state (e.g. by presenting twice the TOGGLE card). Once the
reader is in Disarmed mode you may use any valid identifier to unlock a door.
Example 2: Rearm the reader by entering a TOGGLE user PIN code.
 Key in the TOGGLE user PIN code, use [#] key to mark an end of PIN
 Once accepted the reader grants you access and its LED SYSTEM starts
blinking
 With the LED SYSTEM blinking, once more key in the TOGGLE user PIN code
 The reader changes its arming state from Armed to Disarmed or vice versa
(the LED STATUS will change illumination color)
Example 3: Rearm the reader when the Card and PIN mode is enabled.
 Present your TOGGLE user card to the reader then key in the TOGGLE user PIN
 Once accepted, the reader grants you access and its LED SYSTEM starts
blinking
 With the LED SYSTEM blinking, once more present your TOGGLE card and
then key in the PIN
 The reader changes its arming state from Armed to Disarmed or vice versa (the
LED STATUS will change illumination color)