Roger Dubuis RD107, User Manual

Page: 4 / 42

6 5
you will hear 3 different chimes
in 2 pitches sounding the hours,
quarter-hours and minutes
respectively.
Recommendation of use
Do not use the Minute Repeater
function while setting the time or
when the crown is in position 2.
Do not activate the minute
repeater pusher if the chiming is
in progress.
Do not set the time counter
clockwise before using the
minute repeater function.
Wait 30 seconds after the last
ring to activate either the minute
repeater again or to set the time.
Any of the actions listed above
will damage the mechanism.
The minute repeater function
works with an «all or nothing»
mechanism. When using the
minute repeater pusher, push
until the “All or nothing”
indicator at 9 o’clock goes until
the end of its run, i.e. the arrow to
the furthest right. If the minute
repeater is not pushed enough,
the minute repeater mechanism
will not chime.
Winding the Watch
Your watch is automatically
wound by your wrist movements.
Important: The first time you
wear your watch and whenever it
has stopped, we recommend
manually winding by turning the
crown clockwise in position 1
approximately 45 times.
When winding, the function
indicator at 3 o’clock must show
“winding”.
Setting the time
Pull out the crown to position 2.
The function indicator at 3
o’clock will show “setting”.
Turn the crown clockwise to set
the time.
Once the change has been made,
push the crown back into position 1.
The function indicator at 3 o’clock
will then show “winding”.
Using the minute repeater
function
Use the minute repeater pusher
to activate the eponym function.
When you release the pusher,
Setting the Watch
Minute hand
Crown
Minute repeater pusher
Hour hand
Chiming indicator
All or nothing indicator
Flying tourbillon
Function indicator
RD107