13
E10037-180424
PROBEX
For configuring
a test, go to ‘Test’ and proceed the same way.
Typical set up:
ID
1
Timer Typical (sec)
Pressure loss calibration
‘CAP
+Date’
60
Volume loss calibration
‘CAV
+Date’
60
Test
‘TE
+Date’
60
1
The Apps will automatically increment selected ID
Once setup is completed, select: ‘Begin Calibration or Test’ to start.
Once calibration or testing is started, a window like the one below will be displayed.
After saving the initial readings, the operator should
press ‘Start’ for starting the timer.
Readings will be recorded when timer gets to 0 second. Then the operator can increase
the pressure to the first step a
nd then press ‘Start’ for starting the timer, and so on until
completing the calibration / test.
