4.
How to Use
User Guide
3.4.2 With SAN
Select this function if intended to work with SAN software, each Thunderbolt port will gain
access to a common shared volume. You only need to choose RAID Level (5 or 6), then
array(s) will start to initiate array for Xsan (refer to
Appendix B. Array definition
) and auto
configure LUNs map/connect done.
3.4.3 Manually Config Array
In this function, you can manually setup array with specified RAID level, disk members and
initialization method, then you have to manually setup LUN connect (refer to
Chapter 4.1.6.1.
LUN connect
) to make LUN available to Thunderbolt host.
Summary of Contents for accustor PR3600
