Quick user guide
Helpy GSM
Issue 1.00
Page 25
SMS
Et.hg *
<password (default "0")>
# 89#
Emergency call button
As default the emergency call button is set as normal open contact. This can be
changed to a normal closed contact. To change the alarm button mode:
DTMF
41
<ALC>
SMS
Et.hg *
password (default "0")>
# 41
<ALC>
Wobei:
<ALC> folgende Werte haben kann:
•
0
für
Öffner
•
1
für
Schliesser
Programming using a SD micro memory card
Using the Estant programing tool it is possible to set all required programming
values and store them thne on a SD micro memory card. This data can then be trans-
fered to the emergency phone. To do this inserte the card in the proper slot and dial:
DTMF
941
You will hear the message "correct" after the code and again "correct" when all data
have been read. Remove afterward the SD micro memory card.
Reset to factory default
You can all time reset the device to factory default by dialling:
DTMF
99*
<password (default "0")>
#
SMS
Et.hg *
password (default "0")>
# 99*
password (default "0")>
#
PLEASE NOTE!
The telephone number and ID code will not be cancelled. To delete this entries
just overwrite them with an empty entry.
