Quick user guide
Helpy GSM
Issue 1.00
Page 18
Check speech connection activation
You can check the programmed speech connection activation settings by dialing:
DTMF
78*
SMS
Et.hg *
<password (default "0")>
# 78*
Relay function
Helpy GSM has a programmable relay for different functions:
- Relay follows the yellow indicator (emergency call activated)
- Relay follows the green indicator (emergency call has been answered)
- Power failure (after 30 seconds)
- Driver contact (activation time 2 seconds)
- Emergency/alarm call is active
- Emergency call button is pressed (siren driver)
- GSM network failure (default)
As default the relay is used to signal a GSM network failure (i.e. to switch off the lift
in case of missing emegency call capability. To change the relay function:
DTMF
Relay follows the yellow indicator (emergency call activated)
7511
Relay follows the green indicator (emergency call has been answered)
7512
Power failure (after 30 seconds)
SMS
Automatically after identifi cation message
Et.hg *
<password (default "0")>
# 781
Immediately after call activation
Et.hg *
<password (default "0")>
# 782
To set back to default setting:
DTMF
780
SMS
Et.hg *
<password (default "0")>
# 770
