10
ANGLE GRINDER
ENG
cutting, only cut in the opposite direction to the
disc rotation. If you cut in the same direction as
the disc rotation the disc may push itself out of the
cut slot.
g. When cutting very hard material best results can
be achieved with a diamond disc. When using a
diamond disc it will become very hot. If this hap-
pens you will see a full ring of sparks around the
rotating disc. Stop cutting and allow to cool at no
load speed for 2-3 minutes.
h. Always ensure the workpiece is firmly held or
clamped to prevent movement.
MAINTAIN TOOLS WITH CARE
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodi-
cally and if damaged, have repaired by authorized
service facility.
Your power tool requires no additional lubrication or
maintenance. There are no user serviceable parts
in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with a
dry cloth. Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep all
working controls free of dust. If you see some sparks
flashing in the ventilation slots, this is normal and
will not damage your power tool.
WARRANTY
LIMITED 30-DAY EXCHANGE POLICY
During the first 30 days after date of purchase, you
may exchange a tool which does not work properly
due to defects in materials or workmanship by
returning the power tool to the retailer where it was
purchased. To receive a replacement power tool, you
must present a dated proof of purchase and return
all original equipment packaged with the original
product. The replacement power tool will be covered
by the limited warranty for the balance of the two
year period from the date of the original purchase.
LIMITED TWO YEAR WARRANTY
The manufacturer warrants that, for a period of 2
years from the date of purchase, this product shall
be free of defects in materials and workmanship. We
will repair or replace, at our option, this tool during
the warranty period, provided that the tool is sent
postage prepaid to an approved service center with
all original equipment and a dated proof of purchase.
WHAT IS NOT COVERED
This warranty applies only to the original purchaser
at retail and is not transferable. This warranty does
not apply to accessories or batteries.
This warranty does NOT cover malfunction, failure or
defects due to:
- abnormal use, abuse, neglect, accidents, alteration
or repairs by other than approved service centers
- commercial or rental use.
The manufacturer makes no warranties, representa-
tions or promises as to the quality or performance of
its power tools other than those specifically stated in
this warranty.
FOR SERVICE
Contact the toll free helpline at 1-866-514-ROCK
(7625) to be directed to an approved service center.
When you send the tool for warranty service, you
must also include a dated proof of purchase.
ADDITIONAL LIMITATIONS
Any implied warranty granted under state law,
including warranties of merchantability or fitness
for a particular purpose, are limited to two years
from the date of purchase. The manufacturer is not
responsible for direct, indirect, incidental or conse-
quential damages. Some states and provinces do not
allow limitations on how long an implied warranty
lasts and/or do not allow the exclusion or limitation
of incidental damages, so the above limitations and
exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other
rights which vary from state to state or province to
province.
The manufacturer declines any responsibility in re-
gards to civil liability arising from abusive use or not
in conformity with proper use and maintenance of
the machine as described in the operator’s manual.
After the purchase, the manufacturer recommends
proper maintenance of the machine and to read the
operator’s manual before using the machine.
1
2
3
4
5
6
7
8
9
10
M-RK4747K 2006.6.2.indd 10
2006-7-5 10:54:29
