Rockwell RK2522K2, Manual

Page: 8 / 32

8
12V Cordless osCillating tool eng
3. moUnting the VaCUUm adaPter (see Fig. F1-F5)
Warning:
Before mounting or replacing application tools or
accessories, remove the battery.
This preventative safety measure eliminates danger from accidentally
starting the power tool. Mount the vacuum adapter as shown in F1-F5.
4. oPerating the on/oFF sWitCh
——Switching the power tool ON: Slide switch forward.
——Switching the power tool OFF: Slide switch backward.
5. Using the Variable sPeed dial
Select oscillation frequency (speed) while the motor is running.
The Variable Speed Dial can be used to set the optimum oscillating
frequency according to the accessories used and the respective
application.
High oscillation frequency: Sanding, sawing, rasping and polishing
stone and metal.
Low oscillation frequency: Scraping, polishing varnishes.
6. remoVe or install batterY PaCK (see Fig. g)
Depress the Battery Pack Latches on both sides to release Battery
Pack.
After recharging, insert the Battery Pack into battery port. A simple
push and slight pressure will be sufficient.
7. led light
The sight light allows you to keep a clear view under less illuminated
circumstances. To turn on the light simply press the on/off switch.
When you release the on/off switch, the light will be off.
LED is also a battery capacity indicator. It will flash when power gets
low.
disPosal oF an eXhaUsted batterY
PaCK
To preserve natural resources, please recycle or dispose of
the battery pack properly. This battery pack contains Lithium
batteries. Consult your local waste authority for information
regarding available recycling and/or disposal options. Discharge
your battery pack by operating your drill, then remove the battery
pack from the drill housing and cover the battery pack connections
with heavy-duty adhesive tape to prevent short circuit and energy
discharge. Do not attempt to open or remove any of the components.
A
B
C
E
F1
F2
F3
F4
F5
G
D