6
12V Cordless osCillating tool
eng
obtained from any good DIY store for this purpose.
7. If possible, use clamping devices or other suitable
means to secure the workpiece to a firm surface.
8. Only use accessories in good condition. Do not use
torn or worn accessories.
9. Do not use a damaged plug or cord, if damaged
have them repaired. Always be aware of the cord
location.
10. Do not abuse the cord. Never use the cord to carry
the tools or pull the plug from the outlet. Keep cord
away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately.
11. Do not restart the cutting operation in the
workpiece. Let the tool reach full speed and
carefully reenter the cut.
12. Unplug your tools before mounting or replacing
accessories.
13. Do not “jam” the cut-off saw blade or apply
excessive pressure. Do not attempt to make an
excessive depth of cut.
14. Keep your hands away from cutting area. Do not
reach under the material being cut.
15. hold power tools by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord.
Contact with a ”live” wire will make
exposed metal parts of the tool “live” and shock the
operator.
16. The operating instructions and the enclosed safety
information should be kept carefully for later use
and enclosed with the machine, should it be passed
on or sold.
Warning! While working with this power
tool, hand/arm vibrations occur.
Adopt
the correct working practices in order to reduce the
exposure to vibration.
CaUtion: do not let familiarity with your
sonicrafter
®
make you careless.
Remember
that a careless fraction of a second is sufficient to cause
severe injury.
sYmbols
To reduce the risk of injury, user must read
instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Indoor use only
Do not expose to rain or water
Do not burn
Summary of Contents for RK2522K2
Page 30: ......
Page 31: ......
Page 32: ...Copyright 2012 Positec All Rights Reserved 2CDS80BPK11000A0...