Rockwell Automation PowerFlex 753 Reference Manual Download Page 21 | Manualshive

Page: 21 / 64

background image

Rockwell Automation Publication SYSLIB-RM044D-EN-P - February 2017

21

PowerFlex 753 Drive (P_PF753)

Val_Mode

SINT

Mode.Val

The current mode is shown with status bits and also as an enumeration ‘Val_Mode’ as follows:

0 = No mode
1 = Hand
2 = Maintenance
3 = Override
4 = Program (locked)
5 = Operator (locked)
6 = Program (unlocked, Operator is default)
7 = Operator (unlocked, Program is default)
8 = Program (unlocked, Program is default)
9 = Operator (unlocked, Operator is default)

Val_Owner

DINT

Current Object Owner ID (0 = not owned).

Val_Notify

SINT

Current alarm level and acknowledgement (enumeration):
0 = No alarm
1 = Alarm cleared: a reset or acknowledge is required
2 = Low (acknowledged)
3 = Low (unacknowledged)
4 = Medium (acknowledged)
5 = Medium (unacknowledged)
6 = High (acknowledged)
7 = High (unacknowledged)
8 = Urgent (acknowledged)
9 = Urgent (unacknowledged)

Sts_Stopped

BOOL

1 = Drive requested to stop and is confirmed stopped.

Sts_Starting

BOOL

1 = Drive requested to run and awaiting run feedback.

Sts_Running

BOOL

1 = Drive requested to run and is confirmed running.

Sts_Stopping

BOOL

1 = Drive requested to stop and awaiting stopped feedback.

Sts_Jogging

BOOL

1 = Drive requested to jog.

Sts_CommandDir

BOOL

1 = Drive commanded to Forward.
0 = Reverse.

Sts_ActualDir

BOOL

1 = Drive actual direction is Forward.
0 = Reverse.

Sts_Accel

BOOL

1 = Drive is accelerating.

Sts_Decel

BOOL

1 = Drive is decelerating.

Sts_NotReady

BOOL

1 = Drive is Not Ready (cannot be started), check alarms, stops, faults.

Sts_Alarm

BOOL

1 = Drive has an alarm (see drive display or manual).

Sts_AtSpeed

BOOL

1 = Drive is running at reference speed.

Sts_SpeedLimited

BOOL

1 = Speed Reference setting exceeds configured Max/Min limit.

Sts_DriveSts1

DINT

Drive Status Word #1 (bit mapped) Par 935).

Sts_DriveSts2

DINT

Drive Status Word #2 (bit mapped) (Par 936).

Sts_FaultStsA

DINT

Drive Fault Status A (bit mapped) (Par 952).

Sts_FaultStsB

DINT

Drive Fault Status B (bit mapped) (Par 953).

Sts_PMSts

DINT

Predictive Maintenance status (bit mapped) (Par 469).

Sts_StartInhibits

DINT

Drive Start Inhibit reasons (bit mapped) (Par. 933).

Sts_Available

BOOL

1 = Drive available for control by automation (Program).

Sts_Bypass

BOOL

1 = Bypassable Interlocks and Permissives are bypassed.

Table 9 - P_PF753 Drive Output Parameters

Output Parameter

Data Type

Alias For

Description

«
...
19
20
21
22
23
...
»

Summary of Contents for PowerFlex 753

































































Reviews:

No comments

Related manuals for PowerFlex 753

Brand: ABB Pages: 2

Brand: Unipulse Pages: 99

Brand: Accutrol Pages: 25

Brand: Mainpine Pages: 16

Brand: Danfoss Pages: 20

Brand: Baby Trend Pages: 24

Brand: Baby Trend Pages: 6

Brand: Baby Trend Pages: 6

Brand: C3 Custom Coolers Pages: 16

Brand: Hanna Instruments Pages: 54

Brand: Hanna Instruments Pages: 2

Brand: Quectel Pages: 90

Brand: Mamas & Papas Pages: 24

Brand: Mamas & Papas Pages: 24

Brand: Talgil Pages: 14

Brand: Tadao Pages: 2

Brand: Vacon Pages: 50

Brand: V2 Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands