Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012
21
Chapter
2
Create DeviceNet Network Software Files
In this chapter, you complete the following tasks:
•
Register an EDS file in RSNetWorx for DeviceNet software
•
Set the DeviceNet scanner module’s node address
•
Create a DeviceNet configuration file
•
Associate a DeviceNet configuration file with an RSLogix 5000 project
•
Create a DeviceNet scanlist
Before You Begin
Before you begin, you must complete these tasks:
•
Before Using This Publication on page 5
–
Prepare the Logix5000 control system hardware
–
–
–
Create an RSLogix 5000 project
IMPORTANT
Multiple Logix5000 control systems can use PowerFlex 70 drives over a DeviceNet network. For example purposes,
this quick start describes the use of PowerFlex 70 drives over a DeviceNet network in a CompactLogix 5370 L3
control system.
If you have already completed the steps in this chapter before using this quick start, skip to
PowerFlex 70 Drive in an RSLogix 5000 Project on page 41
.
