Rockwell Automation Allen-Bradley CENTERLINE 2500, Instruction Manual

Page: 69 / 88

Publication 2500-IN001A-EN-P - May 2006
Door Latches, Operator Handles and Unit Interlocks 7-11
Locking Units in the ON/I Position
Locking units in the ON/
I
position requires user modification. To modify the
operator handle to allow locking in the ON/
I
position, remove the tab shown
in Figure 7.14.
Figure 7.14 Removing the Locking Tab
Once the tab has been removed, the door can be locked in the ON/
I
position.
(Figure 7.15)
Figure 7.15 Locking the Large Operator Handle in the ON/I Position
ATTENTION
Locking an operating handle in the ON/
I
position may be
in conflict with local codes and emergency shut down
requirements.
O
N
2
1