Rockwell Automation Allen-Bradley CENTERLINE 2500, Instruction Manual

Page: 16 / 88

Publication 2500-IN001A-EN-P - May 2006
1-6 General Information
Nameplate Data
Each CENTERLINE 2500 MCC column is supplied with a nameplate located
on the enclosure or vertical wireway door, in compliance with IEC 60439-1, 5.1.
See Figure 1.6. for column nameplate information.
Figure 1.6 Column Nameplate
Each unit also has an identification label. On withdrawable units, the unit
identification label is located on the interior of the bottom plate of the unit.
On fixed units, the unit identification label is placed on the interior right side
plate. See Figure 1.7 for unit identification label information.
Figure 1.7 Unit Label
NOTE: The catalog number or serial number and series letter are required to
properly identify the equipment to sales or factory personnel.
Column Number
Catalog Number / Serial Number Series Letter of Column
Power Bus Voltage
and Current Rating
Enclosure Type
Order Number
Catalog Number / Serial Number
Unit Location
Device Type and Rating
Voltage Rating
Series Letter of Unit