Rockwell Automation Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,, User Manual

Page: 51 / 78

Rockwell Automation Publication 6181X-UM002A-EN-P - October 2017 51
Set Up the UEFI Utility Chapter 5
Chipset
Watchdog Timer Configuration
Parameter Description
Adjust Backlight Adjust the internal LCD LED backlight brightness.
Number range: 1 to 100 with 100 as full (100%) brightness; 70 is default.
IMPORTANT: Increasing the brightness from the default setting reduces the
life of the LED backlight, particularly at high temperatures.
LAN 1 Enables or disables onboard LAN1 controller.
Options: Enabled (default) or Disabled
LAN 2 Enables or disables onboard LAN2 controller.
Options: Enabled (default) or Disabled
Returns you to the main set-up screen; see page 42 .
Parameter Description
BIOS Boot Time WatchDog Enables or disables BIOS boot timeout.
Options: Enabled or Disabled (default)
BIOS Timer Out value
(1)
(1) This field is only visible when BIOS Boot time Watchdog is enabled.
Set BIOS timer timeout value (10, 20, or 30 minutes). 10 is default.
OS Time WatchDog Enables or disables OS timeout.
Options: Enabled or Disabled (default)
Timer Out (1-60 Min)
(2)
(2) This field is only visible when OS time Watchdog is enabled.
Set WatchDog timer timeout value (1…60 minutes) in 1 minute increments.
60 is default.
Returns you to the main set-up screen; see page 42 .
IMPORTANT If you enable the BIOS Boot time Watchdog, then it must be disabled before
you update the UEFI firmware.