Rockwell Automation Publication 6181X-UM002A-EN-P - October 2017
39
Replace Components
Chapter 4
Replace or Add a Memory Module
Follow these steps to replace or add a memory module.
1. Follow the steps for
.
2. Remove the computer cover as detailed in
3. Locate the memory module that you want to replace. See
for memory location on the motherboard.
4. Remove the selected memory module.
a. Use your thumbs or two fingers to push open the lock levers, which
release the memory module from its slot for easy removal. See
b. Gently pull out the memory module to remove it from its slot.
c. Place the memory module on a static-dissipating work surface or
inside an antistatic bag.
5. Install the new memory module.
a. Hold the memory module by its edges as you remove it from its
antistatic bag.
b. Orient the module so the notch on its bottom edge aligns with the
keyed surface of the DIMM slot. See
c. Press the module fully into the slot to engage the lock levers. See
6. Reinstall the computer cover as detailed in
7. Follow the steps for
.
Real-time Clock (RTC) Battery
This computer contains a lithium battery that you cannot replace. Return the
computer to Rockwell Automation for battery replacement.
For return information, contact your local distributor or Rockwell Automation
representative, or visit
http://www.rockwellautomation.com/services/online-
.
IMPORTANT
Use an anti-static wriststrap connected to the work surface, and properly
grounded tools and equipment.
TIP
The keyed surface is off center to assist the correct alignment.
The sealed lithium battery contained in this computer could need replacement during the life of
the computer.
At the end of its life, collect the battery in this computer separately from any unsorted municipal
waste.
