Rockwell Automation Allen-Bradley 6181, User Manual, Page: 47 / 91

,QVWDOOLQJ
,QVWDOOLQJ5 5HP HPRRYLQJ WKH
YLQJ WKH +
+DDUUGG
'UL 'ULYYH
H ))ORS
ORSSS\ 'UL
\ 'ULYYHH RU
RU
([SDQVLRQ %D\
([SDQVLRQ %D\
This chapter describes how to install or remove the floppy drive and a
hard disk or solid state drive from the 6181 Industrial Computer and how
to install or remove the optional expansion bay.
The 6181 Computer supports the following disk drives:
Disk Drive Catalog No.
Small EIDE 3.5” hard disk and floppy drive
bay assembly 6189–1BAY2G
Medium EIDE 3.5” hard disk and floppy
drive bay assembly
6189–1BAY6G
1.44 Mbyte floppy diskette drive 6189–FD144
When installing or removing a disk drive from the 6181 Computer,
internal components may be damaged by electrostatic discharge (ESD).
Make sure you wear a grounding strap whenever handling circuit boards,
memory modules or other internal components.
ATTENTION: Wear a wrist strap (well grounded) and
perform work in a static safe environment. Electrostatic
discharge can damage the 6181 Computer and
components.
Observe the following precautions:
•
Always handle the drive by its metal frame.
•
Store a drive in an anti–static bag when it is not installed.
•
Avoid touching the cable connectors.
•
Never disconnect or connect a drive with power turned on.
ATTENTION: Mechanical shock will damage a drive.
Do not drop or bump the drive.
&K &KDDSWHU
SWHU
Chapter Objective
Available Drives
Safety Precautions